How to Install your Bumpster

All you need is the following:

• The Bumpster

• 3 Adhesive Strips (included)

• Alcohol Wipe (included)

• Your Vacuum
  
  When installed, The Bumpster should be approximately 1/2 inch from the floor. That height keeps the Bumpster from interfering with your vacuum operation. Prior to installing The Bumpster, wipe the front and sides of the power head with the enclosed alcohol wipe to ensure good contact. Wait a moment to allow the vacuum to dry. Take the long adhesive strip and center and fasten it across the front of your vacuum. Put The Bumpster in place. Sight where The Bumpster will make contact with the sides of your vacuum to determine where the side adhesive strips should be placed. Secure the side adhesive strips press firmly on the strips before attaching The Bumpster on the sides of your vacuum.